Summary This National Guard position is for an ELECTRONIC INTEGRATED SYSTEMS MECHANIC, Position Description Number D2324000 and is part of the OH 180 Fighter Wing, Ohio Air National Guard. Its purpose is to inspect, test, troubleshoot, repair and modify software controlled automated and manually controlled test stations, ECM Pods, peripherals, support equipment and associated subsystems. Responsibilities As an ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-12/13, you will perform the following duties: 1. On a day-to-day basis, analyzes performance, tests, inspects, troubleshoots, identifies and isolates malfunctions, disassembles, modifies or repairs and reassembles test stations or ECM Pods and their associated peripherals. Considers the complex interrelated variables arising from a mix of computer hardware and software, stimulus and measurement systems, and special purpose test subsystems. Analyzes malfunctions using schematics, logic and wiring diagrams, programming tables, computer program flow charts, software user guides, computer program listings and factory drawings. Diagnoses circuit operating characteristics using computer query, system peculiar test equipment, and computer diagnostics. Isolates problems to the failing part using self-test diagnostics, oscilloscopes, frequency meters, signal generators, digital, and differential voltmeters, computer registers and printouts and other special and standard tools and test equipment. Removes and replaces components, assemblies, subassemblies, or parts using special and common hand tools, soldering devices and special electronic instruments. 2. May modify and updates avionics Pods, support equipment and support software according to applicable technical publications. Analyzes program data and determines if the criteria is sufficient to provide adequate testing and troubleshooting. Examines recurring malfunctions and software deficiencies to determine testing voids and initiates corrective action by submission of quality deficiency reports, software deficiency reports or proposed modifications. Devises repair procedures based on findings and recommends program changes, procedural changes, or data corrections to correct software deficiencies. Recommends revisions to intermediate maintenance directives. 3. Connects associated testing equipment to interface the test station system to the aircraft system and or Pod to facilitate maintenance/repair of POD or line replaceable units (LRUs) from the avionics systems such as radar, fire control, instrument, flight control, inertial navigation, malfunction analysis and recording equipment systems. Determines whether failures are caused by the unit under test (UUT), the Pod, the test station, or the test program. If the malfunction is found to be in the UUT, Pod or the test station, isolates it to the specific component(s), disassembles and effects repair by replacing solid state devices, micro miniature modules, gyros, sensors, transducers, and any other required parts, and assembles after repair is accomplished and performs operational tests. If the malfunction is in the test program, informs engineers and/or Air Force Logistics Command (AFLC) of the problem and serves as subject matter expert in providing practical technical assistance in resolution. Ensures compatibility of items with each other and with extenders and interfaces. 4. Works with engineers and technicians in the development and/or modification of software, interfaces, extender equipment or additional items of test equipment and in validation of technical data concerning the repair, maintenance, and test of the test station and units under test. Initiates technical data changes. Suggests means by which a component or system can be tested more economically or thoroughly and provides practical technical assistance by explaining peculiarities of the program or assemblies of the test station, UUT, interfaces, extenders, test procedures, etc. 5. Provides hands-on training instructions to lower grade personnel concerned with repair of computer controlled automatic test equipment, manually controlled test equipment, line replaceable units and aircraft integrated systems. Also provides on-the-job instruction to newly assigned personnel, regardless of grade level. Prepares for and participates in various types of readiness evaluations such as Operational Readiness Inspections (ORI), Inspector General (IG) inspections, and Unit Effectiveness Inspections and mobility and command support exercises. May be required to perform such additional duties as structural firefighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment, or serve as a team member on a board to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. Ensures that material and equipment are properly stored, protected and maintained. 6. Performs other duties as assigned. The above duty description does not contain all details of the official position description. A copy of the entire position description can be found on FASCLASS by searching the position description PD#: (D2324000). https://acpol2.army.mil/fasclass/search_fs/search_fasclass.asp Requirements Conditions of Employment Ohio Air National Guard Membership is required. Males born after 31 December 1959 must be registered for Selective Service. Federal employment suitability as determined by a background investigation. May be required to successfully complete a probationary period. Participation in direct deposit is mandatory. MILITARY REQUIREMENTS: Compatible military grade and assignment required within one year of the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the Ohio Air National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact an Ohio Air National Guard recruiter prior to applying for this position. Military Grades: E2 through E6 Compatible Military Assignments: WG-2610-12: 2A051 2A031 2A251 2A231 2A252 2A232 2A253 2A233 2A354 2A334 2A355 2A335 2A851 2A831 2A852 2A832 2A951 2A931 2A952 2A932 2A953 2A933 WG-2610-13: 2A071 2A271 2A272 2A273 2A374 2A375 2A871 2A872 2A971 2A972 2A973 To initially qualify and as a condition of continued dual status technician employment: Must have the capability to lift, carry, push, or otherwise handle items weighing up to 70 pounds. Must have the physical capability to stand, climb, walk, bend, crouch, reach, and stoop over extended periods of time. Must possess a valid state driver's license to operate government motor vehicles, for the state in which he or she lives or is principally employed. Must complete the hazmat certification within six months of employment and complete hazmet recertification every two years. Must maintain the position's mandatory AFSC skill level and continue on-the-job proficiency requirements. Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day. Qualifications GENERAL EXPERIENCE: An applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade. SPECIALIZED EXPERIENCE: WG-2610-12: Must have at least a three-skill level in one of the compatible AFSCs, with 12 months of work experiences. WG-2610-13: The applicant must have: - completion of an Air Force Seven Skill Level Technical Training School and awarded a compatible Seven Skill Level AFSC - the successful completion of at least one military professional education course program - at least 12 months of specialized experiences working as an Electronic Integrated Systems Mechanic, WG-2610-12 - the craftsman level of knowledge and skills to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Education For the WG-2610-12 ANG Dual Status Technician positions, the mandatory military training requirements are the completion of an Air Force Three Skill Level Technical Training School and successful On-the-Job training that will result or resulted in the award of a compatible Five Skill Level AFSC. For the WL-13, WL-12, WG-14, and WG-13 ANG Dual Status Technician positions, the mandatory military education requirements are the completion of an Air Force Seven Skill Level Technical Training School and awarded a compatible Seven Skill Level AFSC, along with the successful completion of at least one military professional education course program. Additional Information If serving under an incentive contract, termination of that incentive(s) will occur effective one day prior to your AGR, Permanent Military Technician, or Indefinite Military Technician start date. Temporary Military Technicians will have their incentive terminated if their tour exceeds 179 days in a continuous 12-month period.* If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).