QUALITY INSPECTOR I (1st Shift)

LOCATION:  Riverside, CA                                     

REPORTS TO:  Quality Manager

PAY: 25 - 29/HR depending on experience 

SUMMARY :

Quality Inspector I will perform inspection and testing of product to ensure adherence to established standards of quality. This position is also responsible for operating mechanical inspection equipment to verify product for conformance to engineering requirements. Under guidance, performs receiving inspection, incoming tooling inspection, first part buy-off inspections, systematic inspection of processes being undertaken by production and final inspection before shipping of product. 

ESSENTIAL DUTIES AND RESPONSIBILITIES : i nclude, but, are not limited to the following.  Other duties may be assigned.

• Understand geometric dimensioning & tolerance in accordance with ANSI Y14.5.

• Visually and mechanically measure and inspect parts utilizing a variety of tools including but not limited to micrometers, calipers, taper gauge, paint thickness gauge and vernier caliper

• Perform first part verification, in-process and final inspection of product.

• Assist with First Article Inspection (FAI) performing bubble drawings with results documented.

• Perform basic inspection tool calibration.

• Read and interpret blueprints.

• Measure parts in accordance with blueprints.

• Operate CMM and/or Romer Arm using predetermined alignments, and calibrate as required.

• Identify and segregate nonconforming product.

• Review disposition on nonconforming product.

• Supplies discrepancy sketches, as required for nonconforming product.

• Assist with Root Cause and Correction Actions.

• Review and approve Dimensional Inspection Plans (DIPs).

• Support MRB regarding dimensional issues.

• Maintain and archive documentation per established procedure.

• Maintain inspection work instructions and procedures.

• Maintain understanding and knowledge of quality procedures and work instructions.

• Maintain a safe and organized workstation.

• Provide support to the shop floor.

• Follow all Company policy concerning environmental, health and safety.

• Ability to work flexible hours and different shifts if required.

• Ability to work in a safe professional manner adhering to all regulatory requirements including OSHA, EPA, State and Federal Regulations.

• Importantly, as Superform’s success relies on the productivity of our team and adherence to customer product schedules, an essential function of this position is the ability to arrive at work on-time, as scheduled, in strict adherence to the Time and Attendance Rules Policy.

  IMPROVED FUNCTIONING OF SHOP FLOOR:

• Improved housekeeping through 6S culture

• Encourage team working

• Pro-active problem solving

• Waste reduction; operator waiting, inventory, transportation, motion.

• Health & safety controls & procedures

• Comply at all times with current legislation

• Environmental standards in line with accreditations

• Company policy with regard to all matters

• Return to work & cause for concern interviews

  EMPLOYEE WELFARE:

• Ensure all good Health and Safety practices are being followed.

• Report Health and Safety concerns

  QUALITY:

• Quality systems & procedures in line with accreditations; Quality Standards ISO 9001, AS 9100 and IS0 14001 Environmental Standards.

• Support Quality Concern/ Corrective actions

  QUALIFICATION REQUIREMENTS:

• To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.  The requirements listed below are representative of the knowledge, skill, and/or ability required.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• This position requires access to our export-controlled commodities, technical data, technology and services.  These items are restricted under the International Traffic in Arms Regulations (ITAR) to U.S. Citizens, Lawful Permanent Residents of the U.S. and properly licensed foreign persons.  Therefore, employment is contingent on compliance with ITAR regulations and successfully obtaining and maintaining the necessary export authorization license from the U.S. Department of Commerce’s Bureau of Industry and Security, U.S. Department of State’s Office of Defense Trade Controls, or other applicable government agency.

  EDUCATION AND/OR EXPERIENCE:

• High School diploma or equivalent, minimum of three (3) years of experience as an inspector working in an Aerospace environment is required.

• Employee must be familiar with safety requirements in a manufacturing environment.

• Intermediate level of experience with Microsoft Office Suite and basic internet applications. Ability to navigate through electronic file structures.

• Strong verbal and written communication skills.

• Ability to interpret blueprints and measure parts in accordance with blueprints.

• Completion of Inspection Delegation Program (IDP) for In-Process and Receiving Inspection.

  LANGUAGE SKILLS :

• Ability to communicate in English with the ability to read and comprehend instructions, correspondence, handbooks, manuals, and blueprints.

• Clerical skills must be in English and be at a level that will allow for correct and legible recording and reporting. 

• Must have the ability to effectively present information in English and respond in English to questions from Managers, Customers and Company personnel.

  MATHEMATICAL SKILLS :

• Competence in calculation and measurement skills required for the inspection of tooling and product. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, decimals and metric.

  REASONING ABILITY:

• The ability to apply commonsense understanding to carry out instructions furnished in written and oral form

• Ability to solve problems and deal with variables.

  PHYSICAL DEMANDS : 

  The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the employee is required to stand, walk, sit, use hands to fingers; handle, or feel objects, tools or controls, reach with hands and arms, climb or balance, stoop, kneel, crouch and talk or hear.

• The employee must be capable of lifting up to fifty (50) pounds on a regular basis.

• Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.

  WORK ENVIRONMENT : 

  The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the employee is required to work within a controlled and non-controlled temperature environment ranging from 400 to 1100 Fahrenheit.  Occasional exposure to wet and/or humid conditions may also occur.

• The noise level in the work environment is usually moderate; however, employee will be exposed to an environment of dust and occasional high noise level.  Safety equipment will be provided.

Benefits:

• Medical, Dental, Vision, EAP and Life Insurance

• 401k with Company match of up to 6%

• Company Paid Holidays (10 Days)

• Paid Vacation (Up to 2 weeks your first year)

• Paid Sick Leave (40 hours annually)

Additional Information:

• $19.00 to $25.00 hourly depending on experience

• Monday through Thursday 5:30 AM to 4:00 PM with overtime as business requires + OT on Friday's

We are committed to a safe, drug-free work environment and pre-employment drug screening, physical and background checks are required prior to starting.

Luxfer Superform is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act) with respect to employment opportunities. Women, minorities, and veterans are encouraged to apply.

This position requires access to our export-controlled commodities, technical data, technology, and services. These items are restricted under the International Traffic in Arms Regulations (ITAR) to U.S. Citizens, Lawful Permanent Residents of the U.S., and properly licensed foreign persons. Therefore, employment is contingent on compliance with ITAR regulations and successfully obtaining and maintaining the necessary export authorization license from the U.S. Department of Commerce's Bureau of Industry and Security, U.S. Department of State's Office of Defense Trade Controls, or other applicable government agency. We participate in E-Verify.

Candidates must be authorized to work in the US.

NOTICE FOR CALIFORNIA RESIDENTS

Pursuant to the California Privacy Rights Act, if you are a California resident, you have the right to know the categories of personal information we collect and how it's used. Please visit the site below to access our California Privacy Rights Act Policy for candidates and employees.

https://www.luxfercylinders.com/support-item/california-privacy-notice-to-applicants/

Powered by JazzHR