Job Information
Chart Industries Welder in Palmerton, Pennsylvania
Welder
Location: Palmerton, PA, United States, 18071
Company: Chart Industries
Ensuring Chart’s Success…
Hiring at Fronti Fabrications in Palmerton, PA - a Chart Industries company!
Wages for welders starting at up to $32.00 per hour.
Operating Hours – Monday through Thursday – 6:00-4:30. Must be available to work OT beyond normal operating hours as needed.
What Your Day-to-Day Activities Will Be…
Must train and pass a minimum of 6G level GTAW
GTAW B-31.3 on Aluminum pipe a plus, but not required
Must weld to x-ray quality at all times and when required, pass x-ray and dye penetrant check of welds
FCAW to ASME standards
May weld with other processes and varied weldments and metals as warranted
Works from drawings and specifications
Must identify material and markings to ensure proper piece parts and identification codes are present
Identify and use proper Work Instructions and other related specifications
Must perform fit-checks prior to final assembly with potential to rework fitments to meet drawing specifications
Responsible for quality of weld joint and proper identification of the weld
Setup and operation for ideal welding conditions
Perform minor maintenance on all welding machines such as change torch, foot pedal, fuses, load and adjust MIG wire feeder, and check coolant reservoirs daily.
Set up and operate portable plasma cutter
Preheat preparation prior to welding per instructions
Must keep work area clean and maintain shop housekeeping
May need to perform a job from start to finish including cut/prep /Fitting/ Welding
Unloading and loading of fabricated equipment or inhouse materials
Your Education Should Be…
- Must have a certificate/degree in welding from a certified technical college or 12 months of professional welding experience.
Your Professional Experience Should Be…
The candidate must have sufficient knowledge and ability to:
Use and interpret sub-assembly drawings.
Must have good dexterity and hand-eye coordination.
Understand and work with welding codes, techniques, and special instructions.
Use measuring devices and have basic knowledge of math.
Work with both MIG and TIG weld processes on SS/ Aluminum and other metals when necessary.
Work closely with support groups such as Engineering and Supervisors.
Responsible for quality workmanship and requirements to reduce or eliminate hold points.
The candidate must have sufficient ability to operate:
Welding Machines (MIG & TIG)
Portable Plasma Cutter
Positioner
Oxygen Acetylene Torch
Small Hand Tools
Cleaning Tanks
Various Hand Tools
Wire Brush, Chisel, & Punches
Hand and Electric Trucks
Overhead Cranes
Various Jigs and Fixtures
Bench Grinder
Simple and Complicated Measuring Devices
Your Physical Work Environment Will Require…
Works in an average factory environment. Exposed to the following conditions: heat, sharp edges, sometimes above-average noise, burns, fumes, smoke, dust. Protective equipment and clothing provided. Works in awkward positions: bending, reaching, pulling, pushing, standing, and sitting. Lifting 0 to 50 lbs. When lifting over 50 lbs, two people are required.
Chart is an equal opportunity employer
Chart Industries
- Chart Industries Jobs