Job Information
Auto Sport Bodyworks Autobody Technician in Opelika, Alabama
AVAILABLE THROUGH THE OJT PROGRAM
- File, grind, sand, and smooth filled or repaired surfaces, using power tools and hand tools.
```{=html}
``` 2. Inspect repaired vehicles for proper functioning, completion of work, dimensional accuracy, and overall appearance of paint job, and test-drive vehicles to ensure proper alignment and handling.
```{=html}
``` 3. Fit and weld replacement parts into place, using wrenches and welding equipment, and grind down welds to smooth them, using power grinders and other tools.
```{=html}
``` 4. Prime and paint repaired surfaces, using paint spray-guns and motorized sanders.
```{=html}
``` 5. Sand body areas to be painted and cover bumpers, windows, and trim with masking tape or paper to protect them from the paint.
```{=html}
``` 6. Chain or clamp frames and sections to alignment machines that use hydraulic pressure to align damaged components.
```{=html}
``` 7. Position dolly blocks against surfaces of dented areas and beat opposite surfaces to remove dents, using hammers.
```{=html}
``` 8. Cut and tape plastic separating film to outside repair areas to avoid damaging surrounding surfaces during repair procedure and remove tape and wash surfaces after repairs are complete.
```{=html}
``` 9. Review damage reports, prepare or review repair cost estimates, and plan work to be performed.
```{=html}
``` 10. Fill small dents that cannot be worked out with plastic or solder.
```{=html}
``` 11. Remove damaged sections of vehicles using metal-cutting guns, air grinders and wrenches, and install replacement parts using wrenches or welding equipment.
```{=html}
``` 12. Remove small pits and dimples in body metal, using pick hammers and punches.
```{=html}
``` 13. Remove upholstery, accessories, electrical window-and-seat-operating equipment, and trim to gain access to vehicle bodies and fenders.
```{=html}
``` 14. Mix polyester resins and hardeners to be used in restoring damaged areas.
```{=html}
``` 15. Fit and secure windows, vinyl roofs, and metal trim to vehicle bodies, using caulking guns, adhesive brushes, and mallets.
```{=html}
``` 16. Adjust or align headlights, wheels, and brake systems.
```{=html}
``` 17. Replace damaged glass on vehicles.
```{=html}
``` 18. Remove damaged panels and identify the family and properties of the plastic used on a vehicle.
```{=html}
``` 19. Apply heat to plastic panels, using hot-air welding guns or immersion in hot water, and press the softened panels back into shape by hand.