Summary NATIONAL GUARD MEMBERSHIP IS REQURED This National Guard position is for a MOBILE EQUIPMENT METAL WORKER, Position Description Number D1216000 and is part of the AR ARNG CSMS, National Guard. This announcement will be posted until the position has been filled. Applications will be reviewed every 30 days and you will receive an email regarding your application status when reviewed. Announcement is subject to close at any time upon selection (prior to advertised closing date). Responsibilities (1) Disassembles damaged mobile equipment bodies and components to determine nature and extent of damage and required repairs. Performs repair work on damaged equipment components such as fenders, panels, hoods, cowls, truck beds and associated parts such as brackets, covers, clamps, and braces. Repairs bodies by mending, replacing, or fabricating with sheet metals. On occasion, repairs damaged main frames and structural components such as doorposts, doorframes, skeletal framework, and main support members. (2) Fabricates, assembles, and installs a variety of components made of sheet metal for buses, trailers, shelters, and other equipment. Lays out and cuts materials allowing for seams, joints, laps, and shrinkage. Bends and forms metal parts into desired shapes with hand and power tools and equipment. Uses equipment such as shears, brakes, folders, formers, crimping, burring, and bending machines. Assembles and fastens fabricated parts by installing bolts, rivets, screws, soldering, and welding. Repairs folds, wrinkles, creases, and large tears in fenders, doors, and roofs using hammers, dolly blocks, spoons, bending irons, mallets, sanders, grinders, files and hydraulic jacks. Prepares surfaces for painting by filling and sanding. (3) Removes and replaces damaged fenders, quarter panels, and top panels by cutting and welding with oxyacetylene and electric arc welding equipment. Shrinks and stretches sheet metal to obtain desired shape and fit. Removes and replaces body trim, hardware, windshields, door glass, headliners, and other body components. (4) Repairs radiators, fuel tanks, and similar items by straightening, soldering, patching, tube rodding and splicing, plugging core sections, replacing cores and pressure testing for leaks. Removes, disassembles, reassembles, and installs radiators, fuel tanks and similar items. (5) Occasionally performs electrical repair work such as removing, splicing, insulating, soldering, and replacing cut or defective wiring on mobile equipment. (6) Performs other duties as assigned. Requirements Conditions of Employment National Guard Membership is required. Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position. Military Grades: Enlisted Minimum Grade - PVT (E-1) Maximum Grade - SFC (E-7) Compatible Military Assignments: Selectee must be a member of the Arkansas Army National Guard and be assigned to a compatible military position in CSMS in Enlisted Career Management Field Career Management Field (CMF) CMF 12,13,14,19,25,88,91,92,94. Must become compatible within 12 months of appointment. IMPORTANT NOTES (AS APPLICABLE): Upon selection for this position, individual must possess or initiate a National Agency Check with Inquiries (NACI) background investigation. A favorable determination based upon investigative results is mandatory for this position. Failure to meet these requirements will result in termination of employment. A pre-placement physical is required if not already current. Upon selection, must complete mandatory Full-Time Support (FTS) Training at the Professional Education Center (PEC) within six months of assignment (if applicable, training will be coordinated by the supervisor). Individual must meet all military requirements of the position without creating a grade inversion, as determined by the Human Resources Office (HRO). Technicians will not be militarily senior to their full-time supervisor or wage leader (Grade Inversion). Enlisted members currently at a higher grade than allowed by the position (see Military Grade Requirement above) may apply; however, they must administratively reduce prior to appointment and provide confirmation of the reduction to HRO. Males born after 31 December 1959 must be registered for Selective Service. Federal employment suitability as determined by a background investigation. May be required to successfully complete a probationary period. Participation in direct deposit is mandatory. Qualifications GENERAL EXPERIENCE: Experience or training which has provided a knowledge of mobile body construction; and the skill to remove, fabricate, reshape and replace or repair such damage as, dents, tears, wrinkles, cuts and creases by cutting, knocking out, welding, filling and sanding. SPECIALZIED EXPERIENCE: Experience or training which has provided knowledge of mobile equipment construction and how all components and parts are installed and determine the total extent of damage and repair alternatives. Experience in the use of gas, arc, and welding equipment to cut out damaged or deteriorated areas, remove rusted nuts and bolts, strengthen brackets and braces, weld simple cuts and breaks, and apply heat to bend, reshape damaged areas. Experience in the use of trade equipment. Experience applying body filler to build up depressed areas, and the skill to smooth by grinding and sanding, until the contour is uniform with the adjoining areas. Experience applying primers paint with brush or spray gun, gravity feed and HVLP (high volume low pressure) equipment. Experience in mathematical calculations and scribe patterns in the fabrication of wood or metal parts having straight lines or irregular curves. KNOWLEDGE AND SKILL REQUIRED: -- Ability to determine the methods, equipment, materials, and techniques required to repair damaged mobile equipment bodies and metal body components parts or provide replacements. Knowledge of metal body construction to determine the extent of damage and how various components and parts are installed, i.e., bolted, soldered, riveted or welded. -- Ability to apply body filler to build up depressed areas, and the skill to smooth by grinding and sanding, until the contour is uniform with adjoining areas. Ability to apply primer paint with brush or spray gun equipment. -- Skill in using hammers, dolly blocks, spoons, bending irons, mallets, sanders, grinders, files and hydraulic jacks to remove dents and creases in mobile equipment body components. Skill in the using sheet metal working equipment to cut, bend, form, and shape materials. Skill in using oxyacetylene and electric arc welding equipment to cut, weld, remove or replace damaged fenders, quarter panels, and top panels. -- Knowledge of basic electricity to remove, splice, insulate, solder, replace, or cut defective wiring on mobile equipment. -- Knowledge of arithmetic to calculate and scribe patterns in the fabrication of wood or metal parts. Education Additional Information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).